Work Zone Safety
$39.95 |
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
$109.65 |
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
$19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
$19.85 |
-
NCHRP-350 Certified
For use with 6 ft. or 8 ft boards
$28.50 |
-
Meets MUTCD Specifications
18" & 24" signs available
10" black handle and hardware included
$67.70 for 26+ |
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
$7.75 |
- 2" or 3" thickness in red (danger) or yellow (caution) available
$16.05 |
-
Meets MUTCD and DOT standards
Available in lime or orange, 10 or 12 lbs.,
with or without reflective collars
$139.95 |
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel stand
$149.95 |
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
$30.50 |
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
$138.15 |
-
MASH Approved
Use with 36" or 48" mesh or vinyl roll-up signs
$34.95 |
-
xyz
- Light automatically turns on at dusk and off at dawn
$76.05 |
-
Diameter: 2.375" Overall Height: 36", 42", 48" Material: Flexible Plastic Color:White, Yellow, Orange Sheeting: Double-sided 3" x 12" reflective sheet Reflective Sheeting: Type IV Reflective Sheeting Color: White, Orange, Yellow Spring Type: Fixed, Quick Release, Drivable Compatibility
-
MASH Approved
36" - 48" posts in yellow, white or orange with three mounts to choose from
$50.95 |
-
APWA & VOC Compliant
Nine colors available
$15.50 |
-
Meets MUTCD and DOT standards
Available in lime or orange, 7 or 10 lbs.,
slim or wide body, with or without reflective collars
$38.50 |
-
Meets MUTCD Specifications
18" & 24" signs available
72" pole and hardware included
$149.95 |
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel stand
$149.95 |
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
$49.95 |
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
$103.20 for 26+ |
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
$19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
$55.20 |
-
Meets MUTCD Specifications
18" & 24" signs available
Pole, storage back & hardware included
$70.20 |
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
$80.95 |
-
MASH Approved
36" - 48" posts in yellow, white or orange with a fixed or quick release mount base
$6.50 |
-
Meets MUTCD and DOT standards
Available in lime or orange,
with or without a reflective collar
$112.00 |
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
$72.25 |
-
VOC Compliant
Two colors available
$139.95 |
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel stand
$149.95 |
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
$45.00 for 26+ |
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
$1,295.50 |
-
Dual LED Light 4000 Total Lumens (2,000 each light head) 24 Watts, 2 amps, for the two heads Full Charge Run Time: 14+ hrs. with both light heads on 25+ hrs. with one light head on Storage Dimensions: 17”W x 8”D x 26”H Weight: 44 lbs. 12 VDC sealed 35 amp AGM lead acid battery • Built in 110-240 VAC, 50/60 Hz • UL approved 3 amp charge system • Safely stored/operated at -40ºF to 140ºF • Recommend continuous charging when light is not in use - if fully depleted, may require 24 hours to fully recharge Light Head Specifications • IP-68 rated dust proof and waterproof • 60º beam pattern • Anodized aluminum frame with a polycarbonate lens Part Number: 8005
-
Meets National & State
Flagger Illumination Regulations
Safely illuminates flagger or personal work area
$5.65 |
-
Meets MUTCD and DOT standards
Available with or without a reflective collar
$95.90 |
- 2.5" x 3.5" or 4" x 5" flag sizes available in all APWA colors
$70.50 |
-
MASH Approved
36" - 48" posts in yellow, white or orange with a ground mount base
$139.95 |
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel stand
$120.00 |
-
MASH Approved
Use with 36" or 48" mesh or vinyl roll-up signs
$149.95 |
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
$50.00 for 25+ |
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
$19.95 |
-
Meets MUTCD and DOT standards
FDOT APL number stenciled on cone
$40.00 |
- Use with 36" or 48" roll-up & rigid signs
$78.95 |
-
Diameter: 2.375" Overall (60mm) Height: 28", 36", 42" Material : Flexible Plastic Color: White, Orange, Yellow, Black Included Sheeting: Single 3" x 12" reflective sheet (double-sided available) Reflective Sheeting :Type V super high-intensity abrasion resistant Reflective Sheeting Color: White, Orange, Yellow, Red, Green, Blue Post Top: Long Squeeze, Open Top, Capped Compatibility: Quarter Turn Surface Mount, XLP, or Quarter Turn Base Color: Black (standard), white, and yellow (optional)
-
MASH Approved
36" or 42" flat top or tubular post in yellow, white or orange with a surface mount base
$116.10 |
- 2.5" x 3.5" or 4" x 5" flag sizes available in all APWA colors printed with industry standard legends