Cart empty
Products
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
NCHRP-350 Certified
6 ft. wood or plastic boards with engineer grade or high intensity sheeting available
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
| $109.65 |
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
| $138.15 |
-
MASH Approved
Use with 36" or 48" mesh or vinyl roll-up signs
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
| $40.00 |
- Use with 36" or 48" roll-up & rigid signs
-
MASH Approved
Use with 36" or 48" roll-up or rigid signs
| $31.00 |
- Use with 36" or 48" mesh or vinyl roll-up signs
| $19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
| $19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
-
Meets MUTCD Specifications
18" & 24" signs available
Pole, storage back & hardware included
| $19.85 |
-
NCHRP-350 Certified
For use with 6 ft. or 8 ft boards
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with surface mount included
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with surface mount included
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with ground mount included
-
Meets MUTCD Specifications
18" & 24" signs available
10" black handle and hardware included
| $1,295.50 |
-
Dual LED Light 4000 Total Lumens (2,000 each light head) 24 Watts, 2 amps, for the two heads Full Charge Run Time: 14+ hrs. with both light heads on 25+ hrs. with one light head on Storage Dimensions: 17”W x 8”D x 26”H Weight: 44 lbs. 12 VDC sealed 35 amp AGM lead acid battery • Built in 110-240 VAC, 50/60 Hz • UL approved 3 amp charge system • Safely stored/operated at -40ºF to 140ºF • Recommend continuous charging when light is not in use - if fully depleted, may require 24 hours to fully recharge Light Head Specifications • IP-68 rated dust proof and waterproof • 60º beam pattern • Anodized aluminum frame with a polycarbonate lens Part Number: 8005
-
Meets National & State
Flagger Illumination Regulations
Safely illuminates flagger or personal work area
