Cart empty
Work Zone Safety
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
NCHRP-350 Certified
6 ft. wood or plastic boards with engineer grade or high intensity sheeting available
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
| $109.65 |
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
| $138.15 |
-
MASH Approved
Use with 36" or 48" mesh or vinyl roll-up signs
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
| $40.00 |
- Use with 36" or 48" roll-up & rigid signs
-
MASH Approved
Use with 36" or 48" roll-up or rigid signs
| $31.00 |
- Use with 36" or 48" mesh or vinyl roll-up signs
| $19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
| $19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
-
Meets MUTCD Specifications
18" & 24" signs available
Pole, storage back & hardware included
| $19.85 |
-
NCHRP-350 Certified
For use with 6 ft. or 8 ft boards
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with surface mount included
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with surface mount included
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with ground mount included
-
Meets MASH Standards
Resistant to damage from UV light, ozone, and hydrocarbons
-
Meets MUTCD Specifications
18" & 24" signs available
10" black handle and hardware included
| $1,295.50 |
- Dual LED Light 4000 Total Lumens (2,000 each light head) 24 Watts, 2 amps, for the two heads Full Charge Run Time: 14+ hrs. with both light heads on 25+ hrs. with one light head on Storage Dimensions: 17”W x 8”D x 26”H Weight: 44 lbs. 12 VDC sealed 35 amp AGM lead acid battery • Built in 110-240 VAC, 50/60 Hz • UL approved 3 amp charge system • Safely stored/operated at -40ºF to 140ºF • Recommend continuous charging when light is not in use - if fully depleted, may require 24 hours to fully recharge Light Head Specifications • IP-68 rated dust proof and waterproof • 60º beam pattern • Anodized aluminum frame with a polycarbonate lens Part Number: 8005
-
Meets National & State
Flagger Illumination Regulations
Safely illuminates flagger or personal work area
| $34.95 |
-
xyz
- Light automatically turns on at dusk and off at dawn
-
Diameter: 2.375" Overall (60mm) Height: 28", 36", 42" Material : Flexible Plastic Color: White, Orange, Yellow, Black Included Sheeting: Single 3" x 12" reflective sheet (double-sided available) Reflective Sheeting :Type V super high-intensity abrasion resistant Reflective Sheeting Color: White, Orange, Yellow, Red, Green, Blue Post Top: Long Squeeze, Open Top, Capped Compatibility: Quarter Turn Surface Mount, XLP, or Quarter Turn Base Color: Black (standard), white, and yellow (optional)
-
MASH Approved
36" or 42" flat top or tubular post in yellow, white or orange with a surface mount base
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
- The ADA compliant wall shall not exceed 38" in height, will be 72" in length and 3" thick. Total weight will not exceed 23 lbs. The ADA wall shall be made of high density UV stabilized polyethylene and is available in standard colors of orange or white. The top surface of the wall will provide a smooth continuous ergonomic guide rail. The pedestrian side of the wall shall have a smooth lower surface to allow for sight impaired cane tapping. The male and female linkable connectors will be blow molded to increase strength and flexibility. Each wall will have 10 molded-in vertical windows for improved wind load performance and visibility for guide dogs. Two tubular galvanized steel Step-N-Deploy legs will be in the bottom of each wall. The legs will be deployable with the toe of a boot. Both sides of the wall will have two each, 8" × 53" recessed area for reflective sheeting. The bottom of the wall will have openings to allow for water passage. Each wall will have two receiver holes and two shelves to support the attachment of barricade lights. The shelves will minimize the rotation of the barricade lights. Four molded-in stacking lugs will be on the street side of the wall and 4 molded-in receiver holes will be on the pedestrian side of the wall to allow for stacking, transport and storage. Weight: 23 lbs. (10.43 kg) Length: 72" (182.88 cm) Width: 3" (7.62 cm) Height: 38" (96.52 cm) Material: UV Stabilized Polyethylene Plastic
-
MASH Approved
Available with or without high intensity sheeting
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
- 2" or 3" thickness in red (danger) or yellow (caution) available
-
24" x 12" or 24" x 18" sizes available
High intensity sheeting
| $29.50 |
- Use with 36" or 48" mesh roll-up signs
-
MASH Approved
36" - 48" posts in yellow, white or orange with a fixed or quick release mount base
- Diameter: 2.375" Overall Height: 36", 42", 48" Material: Flexible Plastic Color:White, Yellow, Orange Sheeting: Double-sided 3" x 12" reflective sheet Reflective Sheeting: Type IV Reflective Sheeting Color: White, Orange, Yellow Spring Type: Fixed, Quick Release, Drivable Compatibility
-
MASH Approved
36" - 48" posts in yellow, white or orange with three mounts to choose from
-
Meets MUTCD standards
NCHRP 350 and MASH-16 Compliant
36" & 48" posts in yellow, white or orange with ground mount included
-
APWA & VOC Compliant
Nine colors available
- 2.5" x 3.5" or 4" x 5" flag sizes available in all APWA colors printed with industry standard legends
- Vibrant, fade resistant PVC tape available in 12 colors
- 2.5" x 3.5" or 4" x 5" flag sizes available in all APWA colors
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
-
Meets MUTCD Specifications
18" & 24" signs available
72" pole and hardware included
-
MASH Approved
36" - 48" posts in yellow, white or orange with a ground mount base
-
VOC Compliant
Two colors available
| $49.95 |
-
NCHRP-350 Certified
Kit comes with 4 wood boards, 4 steel legs, hardware, tools, and instructions
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel springless or steel single spring stand
