Cart empty
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available
- Great for janitorial work, marine tasks, plumbing, painting, automotive work, and handling chemicals
-
MUTCD Compliant
Signs available with or without cross ribs
Sewn on mesh or hard plastic pockets available. Many legends to choose from
| $19.95 |
- Exceeds ITE standards and MUTCD visibility specifications
-
Meets MUTCD Specifications
18" & 24" signs available
Pole, storage back & hardware included
-
NCHRP-350 Certified
6 ft. or 8 ft plastic boards with engineer grade or high intensity sheeting available
| $19.95 |
-
Meets ANSI S3.19-1974 standards
PVC dielectric cord
-
Meets ASTM F2413-11 testing
Available in sizes 7-14
- Mesh top for venting, contrasting trim reflective tape and adjustable chin strap
-
MASH Approved
36" - 48" posts in yellow, white or orange with a fixed or quick release mount base
-
Meets MUTCD and DOT standards
Available in lime or orange,
with or without a reflective collar
-
ANSI/ISEA Class 2 Certified
Available in orange or lime,
sizes L - 2XL
-
MASH Approved
Use with 36" or 48" mesh roll-up signs
-
VOC Compliant
Two colors available
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel springless or steel single spring stand
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" or 48" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
Makes 16.9 - 20 oz. when mixed with water
Available in fruit punch, grape, lemon lime, lemonade, mixed berry, and orange
| $1,295.50 |
- Dual LED Light 4000 Total Lumens (2,000 each light head) 24 Watts, 2 amps, for the two heads Full Charge Run Time: 14+ hrs. with both light heads on 25+ hrs. with one light head on Storage Dimensions: 17”W x 8”D x 26”H Weight: 44 lbs. 12 VDC sealed 35 amp AGM lead acid battery • Built in 110-240 VAC, 50/60 Hz • UL approved 3 amp charge system • Safely stored/operated at -40ºF to 140ºF • Recommend continuous charging when light is not in use - if fully depleted, may require 24 hours to fully recharge Light Head Specifications • IP-68 rated dust proof and waterproof • 60º beam pattern • Anodized aluminum frame with a polycarbonate lens Part Number: 8005
-
Meets National & State
Flagger Illumination Regulations
Safely illuminates flagger or personal work area
- Standard grain cowhide leather, keystone thumb, shirred wrist, and a cloth hem for comfort
-
ANSI/ISEA 107-2020 Class 1 Certified
Available in sizes S - 3XL
-
ANSI-ISEA Z89.1 Type 1
Class E & G Certified
Fits head sizes 6.5 - 8.
Multiple colors available
| $20.95 |
-
Meets ANSI S3.19-1974 standards
PVC dielectric cord
-
15" black rubber knee boot
Available in sizes 5-14
-
Meets MUTCD and DOT standards
Available with or without a reflective collar
- 2.5" x 3.5" or 4" x 5" flag sizes available in all APWA colors
-
MASH Approved
36" - 48" posts in yellow, white or orange with a ground mount base
-
Stand MASH Approved
Sign is MUTCD Compliant
Kit comes with a 36" or 48" mesh sign, fiberglass ribs, and an aluminum or steel springless or steel single spring stand
| $120.00 |
-
MASH Approved
Use with 36" or 48" mesh or vinyl roll-up signs
-
Stand MASH Approved
Sign is ASTM Certified & MUTCD Compliant
Kit comes with a 36" reflective vinyl sign, fiberglass ribs, and a steel single spring stand
-
NCHRP-350 Certified
2 ft. or 3 ft plywood boards with engineer grade or high intensity sheeting available
-
Meets MUTCD and DOT standards
FDOT APL number stenciled on cone
